Back to Blog

If you’re budgeting for an epoxy garage floor in Melbourne, you’ve probably noticed that quotes vary wildly. One installer says $2,000, another says $5,500, and neither one explains why. This 2026 price guide breaks down the real epoxy garage floor cost in Melbourne by system type, floor size, and concrete condition, so you know exactly what you’re paying for before anyone picks up a grinder.

Key takeaways

• Epoxy garage floor cost in Melbourne ranges from $60 to $160 per m² installed, depending on the system and prep required.
• A standard double garage (36–40 m²) typically costs $2,500 to $4,500 all in.
• Concrete preparation, not floor size, is the biggest variable in your final price.
• Epoxy flake floors sit at $80–$120/m². Metallic epoxy runs $100–$160/m².
• A cheap quote that skips diamond grinding almost always means a floor that peels within two years.

Epoxy garage floor cost per m² in Melbourne: 2026 price table

Here’s what Melbourne homeowners are paying in 2026, broken down by system type:

System type	Cost per m² (installed)	Best for
Basic single-coat epoxy	$30–$50/m²	Budget workshops, rental properties
Standard 2–3 coat epoxy	$60–$90/m²	Functional garages, light vehicle storage
Epoxy flake flooring	$80–$120/m²	Garages, showrooms, residential laundries
Metallic epoxy flooring	$100–$160/m²	Statement garages, home gyms, feature floors
Heavy-duty industrial epoxy	$90–$150/m²	Commercial workshops, warehouses

These prices include diamond grinding preparation, primer, the system coats, and a polyurethane or polyaspartic topcoat. They do not include crack repairs, moisture remediation, or significant levelling work. Those add cost if your slab needs them.

What does an epoxy garage floor cost for a standard Melbourne garage?

Most Melbourne residential garages fall into one of three size brackets. Here’s what you can expect to pay in each:

Single garage (18–24 m²)

A single garage epoxy floor in Melbourne costs between $1,400 and $2,900 for a flake or standard system. Note that most professional installers carry a minimum call-out of $1,200–$1,500, so small garages pay a slight premium on a per-m² basis.

Double garage (36–44 m²)

A double garage is the sweet spot. Most Melbourne homeowners pay $2,800 to $4,500 for an epoxy flake system in a standard double garage. A metallic epoxy finish on the same floor runs $3,600 to $6,000 depending on the complexity of the design.

Triple garage or large slab (55–80 m²)

At this scale the per-m² rate drops slightly as preparation and mobilisation costs spread across a bigger area. Budget $4,400 to $9,500 for a quality flake or metallic finish on a large slab.

What actually drives the price of your epoxy garage floor?

Two quotes on the same size garage can differ by $2,000 or more. These are the four factors that explain why:

1. Concrete preparation

This is the single biggest variable. Diamond grinding opens the concrete pores so the epoxy bonds properly. If your slab has oil stains, failed paint, moisture issues, or a trowelled hard finish, preparation takes longer and costs more. Expect grinding to add $15–$25 per m² to the base rate. It’s not optional if you want the floor to last.

A quote that doesn’t mention preparation at all is a red flag. It either means they’re skipping it (bad) or burying it in the total without disclosing it (also bad).

2. Concrete condition

Cracks, spalling, and moisture transmission each add scope. A hairline crack might cost $80–$150 to fill. Widespread spalling or a slab that’s wicking moisture can add $500–$1,500 to the job before the epoxy goes down. A good installer will tell you about these during the quote, not surprise you mid-job.

3. System type and number of coats

A basic two-coat system uses less product and less labour than a full metallic epoxy system with a broadcast flake layer and two topcoats. The more layers and the more premium the product, the higher the material cost. Metallic epoxy uses more specialist product and takes longer to lay correctly, which is why it sits at a higher price point than standard flake.

4. Access and layout

A garage that’s easy to get a grinder into, with straight lines and no built-in cabinetry to work around, costs less than one with tight corners, floor drains, step edges, or integrated shelving. If your garage has structural pillars or a laundry section, expect a small uplift.

Epoxy flake vs metallic epoxy: cost comparison for Melbourne garages

These are the two most popular premium systems in Melbourne residential garages. Here’s how they compare on price and outcome:

	Epoxy flake	Metallic epoxy
Cost per m²	$80–$120	$100–$160
Double garage (40 m²)	$3,200–$4,800	$4,000–$6,400
Visual result	Textured, multi-colour chip finish	Liquid marble, 3D depth effect
Slip resistance	Excellent (texture from chips)	Good (topcoat can be made anti-slip)
Hides imperfections	Very well	Moderately
Curing time	Light use in 24h, full cure 7 days	Light use in 24h, full cure 7 days

If your concrete has minor pitting or surface variation, the flake system hides it better. If you want a feature floor that looks like polished marble, metallic epoxy is worth the premium.

How to read an epoxy flooring quote in Melbourne

A legitimate quote should always specify these items in writing:

• Surface preparation method: diamond grinding, shot blasting, or acid etching (grinding is the industry standard for residential)
• Number of coats: primer, base coat(s), and topcoat as separate line items
• Product brand and specification: commercial-grade epoxy has a higher solids content than DIY products
• Crack filling: whether minor crack repairs are included or quoted separately
• Topcoat type: polyurethane or polyaspartic (polyaspartic cures faster and handles UV better)
• Warranty terms: a quality installer typically offers 5–10 years on workmanship

If a quote is a single line item with no breakdown, ask for detail before you sign anything. The cheapest quote on a per-m² basis is often the one that skips preparation or uses a low-solids product that won’t last.

DIY epoxy vs professional installation: the real cost difference

DIY epoxy kits for a double garage run $300–$800 from hardware stores. Professional installation runs $2,800–$4,500 for the same space. That’s a $2,000–$3,700 gap. So why do most Melbourne homeowners choose a professional?

The short answer: DIY epoxy uses water-based systems with around 50% solids content. Professional systems use 100% solids commercial-grade epoxy. The performance difference is significant. DIY floors typically last 3–5 years before peeling or yellowing. Professional floors last 10–20 years with basic maintenance.

The other issue is preparation. Hiring a concrete grinder for a weekend costs $200–$350. Most DIYers skip this step or use acid etching instead, which doesn’t open the pores deeply enough. The result is a floor that looks good for 12 months and then starts delaminating from the edges.

If you’re considering DIY to save money, the calculation only works if you’re comfortable accepting a 3–5 year lifespan and potentially doing it again.

Does the type of topcoat affect the price?

Yes. There are two common topcoat options for Melbourne garage floors:

• Polyurethane topcoat: the standard option, durable and cost-effective. Adds approximately $8–$12/m² to the total.
• Polyaspartic topcoat: faster curing (can drive on it in hours rather than days), better UV resistance, and more flexible. Adds approximately $15–$25/m². Worth considering for garages with direct sun exposure or if you need the garage back in use quickly.

How to get an accurate epoxy garage floor quote in Melbourne

To get a quote that reflects your actual job, have these ready when you contact an installer:

• Approximate floor area in m² (length x width, subtract built-in benches or shelving)
• Photos of the concrete surface, cracks, stains, or any previous coatings
• Whether the garage gets direct sun or is enclosed
• Your preferred system (flake, metallic, or standard)
• Timeline, whether you need the garage back by a certain date

Most reputable Melbourne epoxy flooring companies offer a free on-site measure and quote. An in-person quote is more accurate than a phone estimate because the installer can assess the concrete condition directly.

FAQ: epoxy garage floor cost Melbourne

How much does it cost to epoxy a double garage floor in Melbourne?

A double garage (36–44 m²) with an epoxy flake system costs approximately $2,800–$4,500 in Melbourne in 2026, including preparation and topcoat. A metallic epoxy finish on the same floor typically runs $4,000–$6,400.

What is the cheapest epoxy option for a Melbourne garage?

A basic two-coat epoxy system without decorative finish starts at around $30–$50/m², or $1,100–$2,000 for a double garage. This won’t give you a premium look, but it will protect the concrete and is a significant upgrade over bare concrete or floor paint.

Does the price include concrete preparation?

It should. Any quote that doesn’t mention preparation, specifically diamond grinding , is either excluding it (which will cause the floor to fail) or skipping it entirely. Always confirm that grinding is included before signing.

How long does epoxy garage floor installation take in Melbourne?

Most residential garages are completed in one to two days. The floor needs 24 hours before light foot traffic and 5–7 days before you can park a vehicle on it. Polyaspartic topcoats cure faster. Some allow vehicle traffic within 24 hours.

Will the price go up if my concrete has cracks or stains?

Possibly. Oil stains require degreasing treatment before primer goes down. Cracks need to be filled and feathered. These are usually minor additions ($80–$400 depending on extent), but a good installer will flag them at quoting rather than add them to the invoice mid-job.

Is epoxy flooring worth the cost for a Melbourne garage?

For most homeowners, yes. A quality epoxy floor lasts 10–20 years, is easy to clean, resists oil and chemicals, and adds visible value to the property. The cost per year of service life compares well against alternatives like tiles or polyurethane paint.

Get an accurate price for your Melbourne garage

Every garage is different. The best way to get a real number for your job is to have an installer look at your concrete in person. Metal and Flake offer free on-site quotes across Melbourne. get in touch to book yours and get a detailed breakdown before you commit to anything.