Epoxy Garage Floors
in Camberwell
Camberwell homeowners take pride in their properties. Metal and Flake installs garage floors that hold up to that standard: clean lines, quality materials, and a 7-year guarantee.
Serving Camberwell and Surrounds
Camberwell is established eastern suburbs housing, largely Federation, Edwardian and interwar, with a good number of substantial period homes on generous blocks. Garaging varies more than most suburbs: original detached single garages behind the house, double garages and carports added through the 1980s and 1990s, and modern rebuilt garaging on the properties renovated in the last decade.
Mixed age garaging on a single property is common here and it creates a matching problem that is easy to miss. A floor poured in 1935 and a floor poured in 1995 will grind differently, absorb differently and finish differently, so treating them as one job on one spec gives you a visible difference in the final surface. Camberwell also sits on reactive clay, which shows up as seasonal movement cracking on the older slabs.
What that means for your Camberwell garage floor
Where a property has garaging of different ages we assess and prepare each slab on its own terms so the finished floors actually match. That means separate moisture and porosity checks and adjusting the base coat accordingly, rather than applying an identical spec across both and hoping for the best. Movement cracks are cut out and filled with a flexible repair rather than rigidly patched and left to reopen.
- Mixed age garaging assessed slab by slab for a matched finish
- Reactive clay movement cracking cut out and flexibly filled
- Period property access and surface protection planned in advance
- Flake and metallic both suited to renovated Camberwell garaging
Can you match a new garage floor to an older one on the same property?
Yes, and it is worth asking for specifically, because it does not happen by accident. Concrete of different ages grinds, absorbs and finishes differently, so applying one identical spec across both is exactly how you end up with two floors that visibly do not match. We test and prepare each slab separately and adjust the base coat to the porosity we actually find. It costs a little more attention at preparation stage and it is the difference between a matched result and an obvious join.
We also regularly install across Hawthorn, Surrey Hills, Balwyn, and Canterbury.
Two Finishes. One Standard.
Every Metal and Flake installation uses the same preparation process and the same 7-year guarantee. The difference is in the finish you choose.
Most Popular
Our broadcast flake system is a full multi-layer epoxy installation: diamond-ground concrete, primer, base coat, decorative flake broadcast, and a durable polyaspartic topcoat. The result hides dirt, resists staining, and holds up to daily vehicle use.
- Available in 10+ flake colour blends
- Non-slip texture built in
- Chemical and oil resistant
- Easy to clean, low maintenance
- 7-year written guarantee
Premium
Our metallic system uses pigmented epoxy with a metallic effect topcoat to create a flowing, three-dimensional finish. No two floors look exactly the same. It carries the same preparation standards and 7-year guarantee as our flake system.
- Unique flowing metallic pattern
- High-gloss or satin topcoat options
- Same durable base as epoxy flake
- Ideal for showrooms and prestige garages
- 7-year written guarantee
From bare concrete to finished floor in 4 steps.
We measure your floor, assess the concrete, and give you a fixed written quote with no hidden costs.
Diamond grinding opens the concrete surface for maximum adhesion. Cracks and spalling are repaired before any coating is applied.
Primer, base coat, your chosen finish, and a polyaspartic topcoat are applied in the correct sequence and allowed to cure fully.
We walk you through the finished floor, hand over your written 7-year guarantee, and leave the site clean.
Results that speak for themselves.
The floor looks incredible. They prepped it properly, the finish is perfect, and it was done in a day and a half. Could not be happier.
I had three quotes and Metal and Flake were the only ones who talked about surface prep in detail. That made the decision easy. The result is exceptional.
Get a free quote for
Camberwell
Fill in the form and we will be in touch within one business day to confirm your measure and quote appointment.
- No obligation: the quote is free and there is no pressure to proceed.
- Fixed pricing: what we quote is what you pay.
- Written guarantee: 7 years, included with every installation.
- Fast turnaround: most floors are completed in 1 to 2 days.
Prefer to call? Reach us on 0485 031 001.